Yamaha YZ426F(M)/LC, Owner'S Service Manual

Page: 130 / 608

2 - 22
SPEC
CABLE ROUTING DIAGRAM

Fasten the TPS lead under the
coupler to the frame with a plas-
tic locking tie.
Ò
Pass the carburetor breather
hose and overflow hose
between the connecting rod and
cross tube (frame).
˜
Fasten the neutral switch lead
and oil hose together with a
plastic locking tie and cut off the
tie end.
ˆ
Fasten the cylinder head
breather hose and neutral switch
lead to the frame with a plastic
locking tie.
Ø
Fasten the neutral switch lead to
the frame with a plastic band.
∏
Fasten the cylinder head
breather hose with the hose
holder.
Œ
Pass the clutch cable through
the cable guide.
Â
Fasten the neutral switch lead
and CDI magneto lead
together with a plastic band.
Í
Pass the clutch cable on the
inside the cylinder head
breather hose.
Ê
Pass the cylinder head
breather hose along the inner
side of the radiator pipe.
Ë
Pass the radiator breather
hose from the right side of the
frame to the left side, over
radiator pipe 1, along the inner
side of radiator hose 4 and
the radiator, and between the
lower engine bracket, crank-
case, oil hose and the frame.
◊
Pass the clutch cable
between the frame and radia-
tor and over the lower boss on
the radiator.
„
Pass the neutral switch lead
and CDI magneto lead over
the middle radiator mounting
boss. Then, pass the decom-
pression cable under the mid-
dle radiator mounting boss
and along the left side of the
neutral switch lead and CDI
magneto lead.