manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 83

7-9

Pre-operation checks 

Always perform the pre-operation checks list-
ed on page 5-1 before riding for safety and
proper care of the machine. 

WARNING

POTENTIAL HAZARD 
Failure to inspect the ATV before oper-
ating.
Failure to properly maintain the ATV. 
WHAT CAN HAPPEN 
Increases the possibility of an accident
or equipment damage. 
HOW TO AVOID THE HAZARD 
Always inspect your ATV each time you
use it to make sure the ATV is in safe op-
erating condition. Always follow the in-
spection and maintenance procedures
and schedules described in the Owner’s
Manual.

WARNING

POTENTIAL HAZARD 
Operating this ATV with improper tires,
or with improper or uneven tire pres-
sure. 
WHAT CAN HAPPEN 
Use of improper tires on this ATV, or op-
eration of this ATV with improper or un-
even tire pressure, may cause loss of
control, increasing your risk of an acci-
dent. 
HOW TO AVOID THE HAZARD 
Always use the size and type tires spec-
ified in the Owner’s Manual for this vehi-
cle on pages. Always maintain proper
tire pressure as described in the Own-
er’s Manual on page 5-10.

U5KM12.book  Page 9  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands