manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 137

8-22

NOTE:

_ 

●

If water is added, have a Yamaha dealer
check the antifreeze content of the cool-
ant as soon as possible. 

●

The radiator fan operation is completely
automatic. It is switched on or off accord-
ing to the coolant temperature in the radi-
ator. 

_

If your ATV overheats, see page 8-56 for de-
tails.  

EBU00887

Changing the coolant 

WARNING

POTENTIAL HAZARD 
Removing the radiator cap when the en-
gine and radiator are still hot. 
WHAT CAN HAPPEN 
You could be burned by hot fluid and
steam blown out under pressure. 
HOW TO AVOID THE HAZARD 
Wait for the engine to cool before re-
moving the radiator cap. Always use a
thick rag over the cap. Allow any re-
maining pressure to escape before
completely removing the cap.

U5KM12.book  Page 22  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands