manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 31

4-9

1. On-command four-wheel drive switch “2WD”/“4WD”
2. Differential gear lock switch “LOCK”/“4WD”

EBU14090

On-command four-wheel drive and differ-
ential gear lock switches

This ATV is equipped with an on-command
four-wheel drive switch “2WD”/“4WD” and a
differential gear lock switch “LOCK”/“4WD”.
Select the appropriate drive according to ter-
rain and the conditions.

●

Two-wheel drive (2WD): Power is supplied
to the rear wheels only.

WARNING

POTENTIAL HAZARD 
Riding too fast while the ATV is in
4WD-LOCK. 
WHAT CAN HAPPEN 
All wheels turn at the same speed when
the differential is locked, so it takes
more effort to turn the ATV. The amount
of effort is more the faster you go. You
may lose control and have an accident if
you cannot make a sharp enough turn
for the speed you are traveling. 
HOW TO AVOID THE HAZARD 
Always ride at a slow speed when the
ATV is in 4WD-LOCK, and allow extra
time and distance for maneuvers. 

U5KM12.book  Page 9  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands