manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 158

8-43

Rear brake pedal height adjustment 

NOTE:

_ 

Adjust the rear brake before inspecting the
rear brake pads. 

_ 

The top of the brake pedal should be posi-
tioned 72 mm (2.8 in) above the top of the
footrest. If not, ask a Yamaha dealer to adjust
it.   

a. Distance between brake pedal and footrest

WARNING

POTENTIAL HAZARD 
Operating with improperly serviced or
adjusted brakes. 
WHAT CAN HAPPEN 
You could lose braking ability, which
could lead to an accident. 
HOW TO AVOID THE HAZARD 
After servicing: 

●

Make sure the brakes operate
smoothly and that the free play is cor-
rect. 

●

Make sure the brakes do not drag. 

●

All air must be bled from the brake
system. 

Replacement of brake components re-
quires professional knowledge. These
procedures should be performed by a
Yamaha dealer. 

U5KM12.book  Page 43  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands