manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 143

8-28

Inspection 

The spark plug is an important engine compo-
nent and is easy to inspect. The condition of
the spark plug can indicate the condition of
the engine. The ideal color on the white insu-
lator around the center electrode is a medium-
to-light tan color for a ATV that is being ridden
normally. Do not attempt to diagnose such
problems yourself. Instead, take the ATV to a
Yamaha dealer. You should periodically re-
move and inspect the spark plug because
heat and deposits will cause the spark plug to
slowly break down and erode. If electrode
erosion becomes excessive, or if carbon and
other deposits are excessive, you should re-
place the spark plug with the specified plug.

Specified spark plug: 

DPR8EA-9 (NGK)

U5KM12.book  Page 28  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands