manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 50

5-3

EBU00854

Front and rear brakes
Brake levers and brake pedal

Check for correct free play in the brake levers
and brake pedal. If the free play is incorrect,
adjust it. (See pages 8-41–8-42.) 
Check the operation of the brake levers and
brake pedal. They should move smoothly and
there should be a firm feeling when the brakes
are applied. If not, have the machine inspect-
ed by a Yamaha dealer.

Brake fluid level

Check the brake fluid level. 
Add fluid if necessary. (See pages 8-38–
8-40.)

Brake fluid leakage

Check to see if any brake fluid is leaking out of
the pipe joints or master cylinder. Apply the
brakes firmly for one minute. If there is any
leaking, have the machine inspected by a
Yamaha dealer.

Brake operation

Test the brakes at slow speed after starting
out to make sure they are working properly. If
the brakes do not provide proper braking per-
formance, inspect the brake pads for wear.
(See pages 8-37–8-38.)

Recommended brake fluid: DOT 4

U5KM12.book  Page 3  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands