manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 5

AFFIX DEALER

LABEL HERE

EBU00011

IMPORTANT NOTICE

This machine is designed and manufactured for OFF-ROAD use only. It is illegal and unsafe to
operate this machine on any public street, road or highway.
This machine complies with all applicable OFF-ROAD noise level and spark arrester laws and
regulations in effect at the time of manufacture.
Please check your local riding laws and regulations before operating this machine.

EBU00981

YFM660FS

OWNER’S MANUAL

©2003 by Yamaha Motor Corporation, 

U.S.A.

1st edition, March 2003

All rights reserved.

Any reprinting or unauthorized use

without the written permission

of Yamaha Motor Corporation, U.S.A.

is expressly prohibited.

Printed in Japan.

P/N LIT-11626-17-14

U5KM12.book  Page 2  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands