manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 77

7-3

WARNING

_ 

Indicates a potential hazard that could
result in serious injury or death.

GETTING TO KNOW YOUR ATV 

This ATV is mainly for utility use, but may also
be used for recreation. This section, Riding
your ATV, provides general ATV riding in-
structions for recreational riding. The skills
and techniques described in this section,
however, are appropriate for all types of
riding. Riding your ATV requires special skills
acquired through practice over a period of
time. Take the time to learn the basic tech-
niques well before attempting more difficult
maneuvers.

Riding your new ATV can be a very enjoyable
activity, providing you with hours of pleasure.
But it is essential to familiarize yourself with the
operation of the ATV to achieve the skill neces-
sary to enjoy riding safely. Before you begin to

ride, be sure you have read this Owner’s Man-
ual completely and understand the operation of
the controls. Pay particular attention to the
safety information on pages 2-1–2-6. Please
also read all caution and warning labels on
your ATV.

U5KM12.book  Page 3  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands