manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 159

8-44

EBU00834 

Adjusting the rear brake light switch

The rear brake light switch, which is activated
by the brake pedal and brake levers, is prop-
erly adjusted when the brake light comes on
just before braking takes effect. If necessary,
adjust the brake light switch as follows.
Turn the adjusting nut while holding the rear
brake light switch in place. To make the brake
light come on earlier, turn the adjusting nut in
direction 

a

. To make the brake light come on

later, turn the adjusting nut in direction 

b

.

1. Rear brake light switch

2. Adjusting nut

EBU00356

Cable inspection and lubrication

Lubricate the inner cables and the cable ends.
If the cables do not operate smoothly, ask a
Yamaha dealer to replace them.

WARNING

POTENTIAL HAZARD
Damaged control cables.

WHAT CAN HAPPEN
Corrosion can result when the outer
covering of control cables becomes
damaged. Cables can also become
frayed or kinked. Operation of controls
could be restricted, which could cause
an accident or injury.

HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace dam-
aged cables.

Recommended lubricant:

Yamaha chain and cable lube or 
SAE 10W30 motor oil

U5KM12.book  Page 44  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands