manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 36

4-14

EBU11590

Speed limiter

The speed limiter keeps the throttle from fully
opening, even when the throttle lever is
pushed to the maximum. Turning in the ad-
justing screw limits the maximum engine pow-
er available and decreases the maximum
speed of the ATV.

1. Locknut

2. Adjusting screw

a. 12 mm (0.47 in)

WARNING

POTENTIAL HAZARD 
Improper adjustment of the speed limit-
er and throttle. 
WHAT CAN HAPPEN 
The throttle cable could be damaged.
Improper throttle operation could result.
You could lose control, have an acci-
dent or be injured. 
HOW TO AVOID THE HAZARD 
Do not turn the adjusting screw out
more than 12 mm (0.47 in). Always make
sure the throttle lever free play is adjust-
ed to 3–5 mm (0.12–0.20 in). See page
8-37. 

U5KM12.book  Page 14  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands