Yamaha YFM660FS, Owner'S Manual

Page: 27 / 191

4-5
●
a clock
●
an hour meter (which shows the total time
the key has been turned to “ON”)
Odometer and tripmeter modes
Pushing the “TRIP/ODO” button switches the
display between the odometer mode “ODO”
and the tripmeter modes “A” and “B” in the fol-
lowing order:
ODO
→
TRIP A
→
TRIP B
→
ODO
To reset a tripmeter, select it by pushing the
“TRIP/ODO” button, and then push the “TRIP/
ODO” button for at least three seconds. The
tripmeters can be used to estimate the dis-
tance that can be traveled with a full tank of fu-
el. This information will enable you to plan
future fuel stops.
NOTE:
_
Holding in the “TRIP/ODO” button and then
turning the key to “ON” switches the display
between “mph” and “km/h”.
_
Clock mode
Pushing the “ ”/“ ” button for at least two
seconds switches the display between the
clock mode “CLOCK” and the hour meter
mode “HOUR” in the following order.
CLOCK
→
HOUR
→
CLOCK
To set the clock
1. Push the “ ”/“ ” button until the clock
starts flashing.
2. Set the hours by pushing the “H” button.
3. Set the minutes by pushing the “M” but-
ton.
4. Push the “ ”/“ ” button to set the
clock.
U5KM12.book Page 5 Wednesday, March 26, 2003 3:50 PM