manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 163

8-48

EBU00380

Battery

This machine is equipped with a sealed-type
battery. Therefore it is not necessary to check
the electrolyte or add distilled water in the bat-
tery. If the battery seems to have discharged,
consult a Yamaha dealer.

CAUTION:

Do not try to remove the sealing caps of
the battery cells. You may damage the bat-
tery.

WARNING

POTENTIAL HAZARD

Failure to handle batteries or battery
electrolyte carefully.

WHAT CAN HAPPEN

You could be poisoned. You could be
severely burned by the sulfuric acid in
battery electrolyte. Batteries produce
explosive gases.

HOW TO AVOID THE HAZARD
Avoid contact with skin, eyes or cloth-
ing. Always shield eyes when working
near batteries. Keep out of reach of chil-
dren.
Antidote:
EXTERNAL: Flush with water.
INTERNAL: Drink large quantities of wa-
ter or milk. Follow with milk of magne-
sia, beaten egg or vegetable oil. Get
prompt medical attention.
EYES: Flush with water for 15 minutes
and get prompt medical attention. Keep
batteries away from sparks, flames, cig-
arettes or other sources of ignition. Ven-
tilate when charging or using in a closed
space.

U5KM12.book  Page 48  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands