manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 3

EBU00941

1-

INTRODUCTION

Congratulations on your purchase of the Yamaha YFM660F. It represents the result of many
years of Yamaha experience in the production of fine sporting, touring, and pace-setting racing
machines. With the purchase of this Yamaha, you can now appreciate the high degree of crafts-
manship and reliability that have made Yamaha a leader in these fields.
This manual will provide you with a good basic understanding of the features and operation of this
ATV. 

This manual includes important safety information. It provides information about

special techniques and skills necessary to ride your ATV. 

It also includes basic maintenance

and inspection procedures. If you have any questions regarding the operation or maintenance of
your ATV, please consult a Yamaha dealer.

AN IMPORTANT SAFETY MESSAGE:

●

READ THIS MANUAL TOGETHER WITH TIPS FOR THE ATV RIDER CAREFULLY AND
COMPLETELY BEFORE OPERATING YOUR ATV. MAKE SURE YOU UNDERSTAND ALL
INSTRUCTIONS.

●

PAY CLOSE ATTENTION TO THE WARNING AND CAUTION LABELS ON THE ATV.

●

NEVER OPERATE AN ATV WITHOUT PROPER TRAINING OR INSTRUCTION. FREE
TRAINING IS AVAILABLE TO ANYONE WHO BUYS A NEW ATV. CALL 1-800-887-2887
FOR MORE INFORMATION.

●

THIS ATV, AND ANY OTHER ATV OVER 90cc, SHOULD NOT BE RIDDEN BY ANYONE
UNDER 16 YEARS OF AGE.

U5KM12.book  Page 1  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands