manualshive.com logo in svg

Yamaha YFM660FS, Owner'S Manual

Share
Download
Yamaha YFM660FS Owner'S Manual Download Page 81

7-7

Apparel 

WARNING

Apparel 
POTENTIAL HAZARD 
Operating this ATV without wearing an
approved motorcycle helmet, eye pro-
tection and protective clothing. 
WHAT CAN HAPPEN 
Operating without an
approved motor-
cycle helmet increas-
es your chances of a
severe head injury or
death in the event of
an accident.
Operating without
eye protection can
result in an accident and increases your
chances of a severe injury in the event
of an accident.

Operating without protective clothing
increases your chances of severe injury
in the event of an accident. 
HOW TO AVOID THE HAZARD 
Always wear an approved motorcycle
helmet that fits properly.
You should also wear:

eye protection 

(goggles or face shield)

gloves
boots
long-sleeved shirt or jacket
long pants

U5KM12.book  Page 7  Wednesday, March 26, 2003  3:50 PM

Summary of Contents for YFM660FS
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands