Yamaha XP560D, Service Manual

Page: 623 / 688

9-149
P1601
4. Wire harness continuity.
• Disconnect the sidestand relay coupler, ECU coupler and sidestand switch coupler.
• Open circuit check
Is the coupler condition normal?
YES

Go to step 4.
NO
a. Connect the coupler securely or replace the wire harness.
b. Push the ON/start switch, and then extend and retract the sidestand.
c. Check the condition of the DTC using the malfunction mode of the YDT.
Is it in the “Recovered” condition?
YES

Go to step 7, and complete the service.
NO

Go to step 4.
Between sidestand relay coupler “1” and ECU
coupler “2”
light green–light green
Between sidestand relay coupler “1” and side-
stand switch coupler “3”
light green–light green
B/Y
L
Y/G
P Lg/L
O/ W W /G Y/L
Lg/ W
B/L Br/ W Gy/G G/L R/G Lg/L
W /G W /Y G/R Lg/B L/ W Lg
B/Y L Y/G P W /G Y/L Lg/ W
B/L Br/ W Gy/G Lg/L
W /G W /Y G/R L/ W
Lg
Lg B
G/R
G/Y
L/Y
Lg
2
*
1 3
2
**
*. XP560D
**. XP560E
Is resistance 0

?
YES

Go to “Short circuit check”.
NO
a. Replace the wire harness.
b. Push the ON/start switch, and then extend and retract the sidestand.
c. Check the condition of the DTC using the malfunction mode of the YDT.
Is it in the “Recovered” condition?
YES

Go to step 7, and complete the service.
NO

Go to “Short circuit check”.