Yamaha XP560D, Service Manual

Page: 435 / 688

8-80
SMART KEY SYSTEM
EAS31535
SMART KEY SYSTEM EMERGENCY MODE
When the smart key is lost, damaged, or its battery has discharged, the vehicle can still be turned on
and the engine started. You will need a mechanical key and the smart key system identification number.
To operate the vehicle in emergency mode, carry out the following steps.
TIP
Emergency mode operation will be cancelled if the respective steps are not carried out within the time
set for each operation or if the OFF/LOCK switch is pushed.
1. Stop the vehicle in a safe place.
2. Unlock the seat by inserting the mechanical key into the lock located right side of body and turn it
counter clockwise.
3. Open the seat and check that the trunk light comes on.
4. Push the ON/start switch once.
5. Without completely shutting the seat, raise and lower it three times within 10 seconds.
TIP
Use the rear storage compartment light as a guide when raising and lowering the seat.
The smart key system indicator light “ ” on the speedometer will come on for three seconds to
indicate the transition to emergency mode.
6. After the smart key system indicator light “ ” goes off, use the Parking/Unlock switch to enter the
identification number. Refer to the following procedure on how to input the identification number.
1
1. Smart key system indicator light “ ”
12
3
456
1
1. Identification number