![background image](http://html.mh-extra.com/html/national-cycle/quantum-n50004/quantum-n50004_installation-instructions_708495001.webp)
Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this
windscreen for a customer, please give them this manual. It contains information needed to properly maintain and use this product.
Item Description
Qty.
Replacement Windscreen
1
PACKAGE CONTENTS
TOOLS REQUIRED
5mm Hex Key or Driver
10mm Box Wrench or Socket
#1 Phillips Screwdriver
Quantum® Hardcoated Replacement Screen for
2019 Honda® PCX125/150
N50004
Sport-Touring Windscreen
N50005
Touring Windscreen
N50006
Tall Touring Windscreen
PREPARATION
1.
Place vehicle securely on its centerstand.
INSTALLATION
2.
Remove the two 4x16 Self-Tapping Phillips Screws under the
nose of the OEM windscreen.
Fig. 01
3.
Lift up front of windscreen cowl to separate the 20x25 Dual
Lock™ Fasteners. Carefully remove the windscreen cowl by
pulling it downward toward front wheel while gently lifting up the
top left/right corners to release the tabs from their slots. Do not
use excessive force.
4.
Remove the two 5x14 Panhead Allen Screws and 5mm
Thrust Washers securing the windscreen at the bottom left/right
from their captive Wellnuts.
Fig. 02
5.
Remove the two 6x12 10mm Bolts securing the windscreen
at the top left/right. Bolts have captive 9.5x18 Washers.
Fig. 03
Retain all hardware for reassembly of new windscreen.
National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA
708-343-0400 / Fax: 708-343-0625 www.nationalcycle.com e-mail: [email protected]
©2019 National Cycle, Inc.
Page 1 of 3
10-110802-000 06/19
NOTES
All OEM hardware will be reused.
Fig. 01
Fig. 02
Fig. 03
Quantum® is a registered trademark and
exclusive product of National Cycle Inc.