Yamaha WaveRunner FX Cruiser SHO, Service Manual

Page: 409 / 433

8-54
E
HULL
HOOD
1
2
3
4
5
6
7
8
9
Drain plug check
1. Check:
• Drain plug
1
• O-ring
2
Cracks/damage
→
Replace the drain
plug.
1
2
Front protector 1 installation
1. Install:
• Front protectors
NOTE:
Apply soapy water to the inner surfaces
a
of
the grommets before installing the projections
b
of the front protectors.
a
b
Pull-up cleat cover installation (FX
Cruiser SHO)
1. Install:
• Pull-up cleat covers
NOTE:
Make sure that the word “ YAMAHA ”
a
on
each pull-up cleat cover can be read correctly
from the side of the watercraft as shown.
a
Reboarding step installation
1. Install:
• Reboarding step
Installation steps:
1. Fasten the brackets in both sides of the
reboarding step in the down position with
plastic ties
1 as shown so that they will
not return to the up position.
2. Finger tighten all of the bolts, and then
tighten them to the specified torque.
T
R
.
.
Reboarding step assembly bolt:
16 N · m (1.6 kgf · m, 11.8 ft · lb)
LOCTITE 271
1
1
Deck and hull