Yamaha WaveRunner FX Cruiser SHO, Service Manual

Page: 37 / 433

1-32
E
GEN
INFO
1
2
3
4
5
6
7
8
9
Multifunction meter
A multifunction meter with an analog speedometer/tachometer located in the center has been
adopted. This meter is basically comprised of 3 types of meters. When the multifunction meter starts
operating, the analog speedometer/tachometer makes 1 sweep, all displays light up for 2 seconds,
and then the meter starts to operate normally. The indicator lights and displays of the multifunction
meter will continue to operate for 25 seconds after the engine stops.
1 Analog speedometer/tachometer and indicator
lights
2 Left multifunction display and operation buttons
3 Right multifunction display and operation
buttons (FX Cruiser SHO)
The analog speedometer/tachometer and indicator lights have the following functions.
1
Analog speedometer/tachometer
2
“ SPEED ” indicator light
3
“ WARNING ” indicator light
4
“ RPM ” indicator light
5
“ UNLOCK ” indicator light
6
“ L-MODE ” indicator light
The analog speedometer/tachometer can be used as a speedometer or a tachometer; however,
both cannot be selected at the same time. To switch between the speedometer and the tachometer
functions, push the
“ Speed/RPM ” button for at least 1 second when the multifunction meter is oper-
ating. The “ SPEED ” indicator light comes on when the analog speedometer is selected. The “ RPM ”
indicator light comes on when the analog tachometer is selected.
1 “ Speed/RPM ” button
2 “ SPEED ” indicator light
3 “ RPM ” indicator light
2
1 3
5
1
6
2
3
4
2
3
1
Feature and benefit