Yamaha WaveRunner FX Cruiser SHO, Service Manual

Page: 148 / 433

5-23
E
POWR
29. Install the air filter case
V
, and then
tighten the air filter case bolts
W
to the
specified torque.
30. Install the air filter case cover X , and then
hook the fasteners Y .
31. Install the intake pipe Z , and then tighten
the clamps [ .
32. Connect the breather hose
\
to the intake
pipe
Z
.
T
R
.
.
Air filter case bolt:
13 N · m (1.3 kgf · m, 9.6 ft · lb)
T
R
.
.
Intake pipe clamp:
3 N · m (0.3 kgf · m, 2.2 ft · lb)
Z
[
X
W
Y
V
\
33. Connect the fuel pump module coupler
]
and electric bilge pump coupler
`
.
34. Connect the quick connector
a
to the fuel
rail.
Refer to
“ Fuel tank removal ” in Chapter 4.
]
a ^
35. Clamp the wiring harness assembly with 5
plastic ties.
NOTE:
Align the plastic ties with the gray tape
c
on
the wiring harness assembly.
c c
36. Connect the remote control receiver cou-
pler b .
37. Install the antenna holders c .
b
A
c
A
Engine unit