Yamaha WaveRunner FX Cruiser SHO, Service Manual

Page: 310 / 433

E
ELEC
– +
7-33
2. Measure:
• APS input voltage
Within specification
→
Measure the APS
resistance.
Out of specification
→
Check the APS
circuit.
Measurement steps:
1. Disconnect the APS coupler 1 .
2. Push the unlock button, and then measure
the input voltage at the APS coupler termi-
nals (wiring harness end).
APS 1 input voltage (reference data):
Orange/red (O/R) – Black/red (B/R)
4.75 – 5.25 V
APS 2 input voltage (reference data):
Orange/white (O/W) –
Black/white (B/W)
4.75 – 5.25 V
1
O/R B/R O/W B/W
3. Measure:
• APS resistance
Out of specification
→
Replace the APS.
Measurement steps:
1. Disconnect the APS coupler.
2. Check that the APS pulley stopper
a
con-
tacts the fully closed stopper
b
when the
APS pulley is at the fully closed position
È
.
b
a
È
1 2 3 4 5 6 7 8
Control system