Yamaha WaveRunner FX Cruiser SHO, Service Manual

Page: 98 / 433

3-15
E
CHK
ADJ
3. Remove the oil filler cap
1
and oil level
gauge
2
.
4. Insert the tube
3
of an oil changer into the
oil level pipe
4
.
5. Operate the oil changer to extract the oil.
6. Fill the crankcase with the specified
amount of the recommended engine oil
through the oil filler hole
5
.
7. Install the oil filler cap 1 and oil level
gauge 2 .
8. Check the engine oil level.
Refer to “ Engine oil level check. ”
NOTE:
When adding engine oil, wait approximately 5
minutes until the engine oil settles.
Recommended engine oil:
API: SE, SF, SG, SH, SJ, or SL
SAE: 10W-30, 10W-40, 20W-40, or
20W-50
Engine oil quantity:
Total amount:
4.3 L (4.55 US qt, 3.78 Imp.qt)
Without oil filter replacement:
3.0 L (3.17 US qt, 2.64 Imp.qt)
With oil filter replacement:
3.1 L (3.28 US qt, 2.73 Imp.qt)
PORT
STBD
1
2
4
5
3
Oil filter replacement
1. Replace:
• Oil filter
Replacing steps:
1. Remove the engine cover.
2. Place a rag under the oil filter
1 .
3. Remove the oil filter with the special ser-
vice tool.
4. Lubricate the O-ring
2
of the new oil filter
with a thin coat of engine oil.
CAUTION:
Make sure the O-ring 2 is positioned cor-
rectly in the groove of the oil filter.
Oil filter wrench:
90890-06830
1
2
E
Power unit