Yamaha WaveRunner FX Cruiser SHO, Service Manual

Page: 38 / 433

1-33
E
GEN
INFO
The analog speedometer shows the watercraft speed against water. The large inner numbers on
the meter show the watercraft speed in miles per hour (mph) and the small outer numbers show
the speed in kilometers per hour (km/h) when the speedometer function is selected.
To switch the speedometer display between kilometers and miles, push the “ Volt/Hour ” button for at
least 1 second, within 10 seconds after the multifunction meter starts operating. The “ SPEED ” indi-
cator light comes on when the analog speedometer is selected. The “ SPEED ” indicator light blinks 3
times in the following instances:
• The analog speedometer/tachometer is switched to the speedometer function when miles are
selected as the display units.
• The display units of the multifunction meter are switched to miles from kilometers.
• Miles are selected as the display units when the multifunction meter starts operating.
1
“ SPEED ” indicator light
The “ RPM ” indicator light comes on when the analog tachometer is selected. The analog tachome-
ter shows the engine speed (r/min). The large inner numbers on the meter show the engine
speed ( × 100 r/min) when the tachometer function is selected.
1 “ RPM ” indicator light
The “ WARNING ” indicator light blinks or comes on, together with a warning indicator, when a mal-
function has occurred.
1
“ WARNING ” indicator light
1
1
1
Feature and benefit