Yamaha VMX12 2001, Service Manual

Page: 45 / 454

2 - 21
SPEC
TIGHTENING TORQUES
CHASSIS TIGHTENING TORQUES
Part to be tightened Thread size
Tightening
torque
Remarks
Nm m·kgf
Upper bracket and inner tube M8 23 2.3
Upper bracket and steering shaft M22 110 11.0
Handlebar holder (lower) and handlebar holder
(upper)
M8 20 2.0
Ring nut (steering shaft) M25 3 0.3 See NOTE
Brake hose joint and lower bracket M6 7 0.7
Front master cylinder cap (brake and clutch) M4 2 0.2
Handlebar holder (lower) M10 40 4.0
Front master cylinder (brake and clutch) M6 9 0.9
Union bolt (brake hose) M10 30 3.0
Clutch hose and clutch pipe M10 19 1.9
Engine mounting:
Mounting bolt (engine and front frame) M10 42 4.2
Mounting bolt (engine and rear frame) M12 70 7.0
Engine bracket and frame M8 16 1.6
Frame and down tube M10 45 4.5
Frame and rear cross bar M8 23 2.3
Swingarm pivot shaft (left) M25 100 10.0
Swingarm pivot shaft (right) M25 7 0.7
Swingarm pivot shaft locknut (right) M25 100 10.0
Rear shock absorber and frame M8 20 2.0
Rear shock absorber and swingarm M10 35 3.5
Rear shock absorber and final gear case M10 30 3.0
Swingarm and final gear case M10 42 4.2
Fuel sender and fuel tank M6 7 0.7
Side cover and frame M6 7 0.7
Sidestand bolt and nut M10 40 4.0
Left footrest bracket and frame M8 26 2.6
Left footrest bracket and rear frame pipe M8 26 2.6
Rear frame pipe and frame M8 30 3.0
Right footrest bracket and frame M8 23 2.3
Union bolt (rear brake hose) M10 30 3.0
Front fender brace M6 9 0.9
Front wheel axle M14 58 5.8
Front wheel axle pinch bolt M8 20 2.0
Rear wheel axle nut M18 150 15.0
Front brake caliper M10 40 4.0
Rear brake caliper M10 40 4.0
Brake disc and wheel M8 23 2.3
LT
Caliper bleed screw M8 6 0.6