Yamaha VMX12 2001, Service Manual

Page: 235 / 454

4 - 105
ENG
MIDDLE GEAR
Since the shims are only available in 0.10- or
0.15-mm increments, round off the hun-
dredths’ digit.
In the example above, the calculated drive pin-
ion gear shim thickness is 0.54 mm. The chart
instructs you to round off to 0.55 mm. Thus,
0.15 mm and 0.4 mm should be used as indi-
cated in the following chart.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Hundredth’s digit Rounded value
0, 1, 2 0
3, 4, 5, 6 5
7, 8, 9 10
Drive pinion gear shim
Thickness (mm)
0.15 0.30 0.40 0.50