Yamaha TT-R50E, Owner'S Service Manual

Page: 322 / 390

5 - 11
CHAS
REMOVAL POINTS
Handlebar grip
1. Remove:
• Handlebar grip
1
NOTE:
Blow in air between the handlebar or tube
guide and the grip. Then remove the grip
which has become loose.
INSPECTION
Handlebar
1. Inspect:
• Handlebar
1
Bends/cracks/damage
→
Replace.
WARNING
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken the
handlebar.
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
• Starter lever
1
NOTE:
Be sure to align the flat section
a
of the starter
lever
1
with the flat section
b
of the bracket
on the handlebar
1
a
b
1
2. Install:
• Left grip
1
Apply the adhesive to the handlebar
2
.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface
a
with a lacquer thinner.
• Be sure to align the projection “L”
b
on the
left grip with the punch mark
c
on the han-
dlebar.
HANDLEBAR