![Yamaha TT-R50E Owner'S Service Manual Download Page 278](http://html.mh-extra.com/html/yamaha/tt-r50e/tt-r50e_owners-service-manual_946792278.webp)
4 - 46
ENG
AC MAGNETO AND STARTER CLUTCH
3. Install:
• Spring
1
• Spring cap
2
• Pin
3
4. Install:
• Shim
1
• Starter wheel gear
2
• Starter idle gear
3
• Shaft
4
NOTE:
• Apply the molybdenum disulfide oil on the
starter wheel gear inner circumference.
• Apply the engine oil on the starter idle gear
inner circumference and on the shaft outer
circumference.
1 2 3
1
2
3
5. Install:
• Woodruff key
1
• Rotor
2
NOTE:
• Clean the tapered portion of the crankshaft
and the rotor hub.
• When installing the rotor, make sure the
woodruff key is properly seated in the key
way of the crankshaft.
6. Tighten:
• Rotor nut
1
NOTE:
• Tighten the rotor nut
1
while holding the
rotor
2
with a sheave holder
3
.
• Do not allow the sheave holder to touch the
projection on the rotor.
7. Install:
• Crankcase cover (left)
NOTE:
• Pass the starter motor lead
1
and neutral
switch lead
2
into the crankcase cover
groove as shown.
• Fasten the starter motor lead with the clamp
3
.
Sheave holder:
YS-01880-A/90890-01701
T
R
.
.
48 Nm (4.8 m · kg, 35 ft · lb)
3
1
2
Summary of Contents for TT-R50E
