Reference Manual
Appendix
155
Are the parameter settings such as Element Switch, Part Switch, Note Limit and
Velocity Limit appropriate?
[VOICE]
[EDIT]
[MUTE] (lighting)
Number [9] – [16] buttons
[PERFORM]
[PART ON/OFF] (
)
[PERFORM]
[EDIT]
Part selection
Play Mode
)
[PERFORM]
[EDIT]
Part selection
Play Mode
Velocity Limit Lo/Hi (
)
When the Performance/Multi produces no sound, has a Voice been assigned to each
Part?
[PERFORM]
[EDIT]
Part selection
Voice (
)
[MULTI/SEQ PLAY] (selecting Multi mode)
[EDIT]
Part selection
Voice (
When the Performance/Multi produces no sound, is the output setting of each Part set
appropriately?
[PERFORM]
[EDIT]
Part selection
Play Mode
Output Select (
)
[MULTI/SEQ PLAY] (selecting Multi mode)
[EDIT]
Part selection
Play Mode
Output Select (
)
When the Multi produces no sound, are the output port/channel of each track in the
external sequencer and the receive channel of each Part in the Multi set appropriately?
[MULTI/SEQ PLAY] (selecting Multi mode)
[EDIT]
Part selection
Voice
)
When the Performance/Multi produces no sound, is the “Arpeggio Play Only”
parameter of each Part turned on?
[PERFORM]
[EDIT]
Part selection
Voice
Arp Play Only (
[MULTI/SEQ PLAY] (selecting Multi mode)
[EDIT]
Part selection
Voice
Arp Play Only (
No sound from the MIC INPUT jack
Is the microphone switch turned on?
Is the cable between the microphone and the synthesizer properly connected?
Is the [MIC ON/OFF] button set to on (lamp lights)?
Is the INPUT GAIN knob turned fully counter-clockwise (to the minimum)?
Are the volume settings of the A/D Input Part too low?
Selecting “MIC” via the Knob Function button
VOLUME knob (
Are the effect settings appropriate?
[UTILITY]
Voice
A/D FX (
[PERFORM]
[EDIT]
Common
A/D FX (
[MULTI/SEQ PLAY] (selecting Multi mode)
[EDIT]
Common
A/D FX (
)
Is the output setting of the A/D Input Part set appropriately?
[UTILITY]
Voice
A/D Out
Output Select (
[PERFORM]
[EDIT]
Common
A/D Out
Output Select (
[MULTI/SEQ PLAY] (selecting Multi mode)
[EDIT]
Common
A/D Out
Output Select (
)
Split does not work via the external MIDI device
The settings of the “Split Sw” parameter and “Split Lower/Upper” parameter in the
Performance mode work only when playing the keyboard of the instrument itself.