Yamaha S70 XS Reference Manual Download

Page: 123 / 160

Reference Manual

Reference

123

Remote Mode

In the Remote mode, you can use the sliders, knobs and buttons of this instrument to control the sequencer tracks and

mixer channels of the DAW software on the computer. For example, you can start/stop playback of the DAW software on

the computer by using the Function buttons and control the song position on the DAW software by using the Data Dial,

instead of using the mouse or keyboard of the computer.

The DAW applications Cubase, Logic Pro, SONAR and Digital Performer can be controlled by the Remote mode of the

S90 XS/S70 XS. The Tuning setting is found in the Utility pages.

The REMOTE display appears (like those shown below), and the panel controls (such as buttons, Knobs, Sliders, and

data dial) are enabled for Remote operation of the computer software (their normal functions are disabled). Press this

button again to exit from the Remote mode.

The DAW software name

Shows the DAW software name which is set in the Utility mode (

page 143

Control Template Number/Template Name

Up to fifty Control Templates can be saved in the S90 XS/S70 XS. Use the S90 XS/S70 XS Remote Editor for editing the

Control Template. For details, refer to the S90 XS/S70 XS Remote Editor owner’s manual.

Parameter Values of the Knob Output Select in each Template

Shows the parameter values of the Knob Output Select set in the Remote Template. The Knob Output Select of the

Remote Template can be set with the S90 XS/S70 XS Editor. In the following situation, the setting of the Knob Out Select

parameter will be shown as “CC” automatically.

• The MIDI In/Out is set to “MIDI.”

• The DAW Select is set to a value other than “Cubase.”

Parameter name

Shows the parameters which can be changed via the Knobs and Sliders on the panel. The displayed parameters are

the last four parameters that have been operated via Knobs and Sliders.

Operation

Press the [DAW REMOTE] button.

Summary of Contents for S70 XS

































































































































































Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands

Yamaha S70 XS, Reference Manual

Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands