Yamaha S70 XS Reference Manual Download Page 27

Page: 27 / 160

Reference Manual

Reference

Normal Voice Edit

Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ

Supplementary Info.

Basic Structure

Appendix

Voice Mode

Voice Play

The Voice mode is used for selecting, playing, and editing a desired Voice. The Voice Play mode is the main “portal” by

which you enter the Voice mode, and it is here where you select and play a Voice. Some of the Voice settings can also

be edited in this mode.

Voice Play display

Selecting a preset Voice

This synthesizer has Voices in each of 16 Banks: Preset 1 – 8, User 1 – 4, GM, Preset Drum, User Drum, and GM Drum.

The Bank consists of eight Groups (A to H), each of which contains 16 Voices. To select the desired Voice, select the

Bank, Group, then Number.

Press the [VOICE] button.

This calls up the Voice Play display. (The [VOICE] button lamp lights.)

Select a Voice Bank with the BANK [DEC]/[INC] buttons.

In this condition, playing the keyboard sounds the Voice indicated in the display.

Select a Group.

Press one of the [A] to [H] buttons to select a Voice. If you’ve selected a Preset/User Drum Bank in the previous

step, press one of the [A] to [D] (Preset) or [A] to [B] (User) buttons to select a Group. Note that the GM Drum Bank

contains only one Drum Voice, indicating that you cannot select a Group.

Select a Voice.

Press one of the Number [1] to [16] buttons to select a Voice.

In this way (steps 2 – 4), you can call up your desired Voice.

NOTE:

When selecting the Voice within the same Bank or Group, it is not necessary to select the Bank or

Group again. You can use the [DEC] and [INC] buttons or Data Dial to select the Voice number. This

operation lets you call up Voices in subsequent or previous Groups and Banks.

Operation

Press the [VOICE] button.

BANK [DEC]/[INC] buttons

[A] to [H] buttons

Number [1] to [16] buttons

Summary of Contents for S70 XS

































































































































































Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands

Yamaha S70 XS, Reference Manual

Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands