Reference Manual
Reference
53
Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ
Break Point 1 – 4
Determines the four Break Points by specifying the respective note numbers.
Settings:
C -2 – G8
NOTE:
Break Point 1 to Break Point 4 will be automatically arranged in ascending order across the keyboard.
Cutoff Offset 1 – 4
Determines the offset value to the Cutoff parameter at each Break Point. For details about Filter Scaling, refer to “Setting
example of Filter Scaling” (
) of the Supplementary information.
Settings:
-128 – +0 – +127
NOTE:
Regardless of the size of these Offsets, the minimum and maximum Cutoff limits (values of 0 and 127, respectively) cannot be
exceeded.
NOTE:
Any note played below the Break Point 1 note results in the Break Point 1 Level setting. Likewise, any note played above the
Break Point 4 note results in the Break Point 4 Level setting.
Level
Determines the output level of the Element.
Settings:
0 – 127
Level Velocity Sens (Level Velocity Sensitivity)
Determines how the output level of the Element responds to velocity. Positive settings will cause the output level to rise
the harder you play the keyboard. A setting of 0 will cause the output level not to change. Negative settings will cause
the output level to rise the more softly you play the keyboard.
Settings:
-64 – +0 – +63
Level Velocity Curve (Level Velocity Sensitivity Curve)
The five curves determine how the actual velocity will be generated according to
the velocity (strength) with which you play notes on the keyboard. The horizontal
axis of the graph represents velocity, and the vertical axis represents volume
range.
Settings:
Curve 0 – 4
Level Velocity Offset (Level Velocity Sensitivity Offset)
Raises or lowers the level specified in Level Velocity Sens above. A setting of 64 results in the original Level Velocity
Sens values being used. Settings above 64 will raise the level specified in Level Velocity Sensitivity. Settings below 64
will reduce the level.
Settings:
0 – 127
Level Key Follow Center Key (Level Key Follow Sensitivity Center Key)
This indicates that the central note for Level Key Follow above is C3. the value cannot be changed. Keep in mind that
this is for display purposes only.
Level Key Follow (Level Key Follow Sensitivity)
Determines the degree to which the notes (specifically, their
position or octave range) affect the amplitude level (set
above) of the selected Element, assuming C3 as the basic
pitch. A positive setting will lower the output level for lower
notes and raise it for higher notes. A setting of 0 will cause the
output level not to change. A negative setting will have the
opposite effect.
Settings:
-200% – +0% – +200%
Filter Scale
AMP Level/Pan (Amplitude Level/Pan)
Playing strength (velocity)
High
Strong
Low
Soft
Volume
+
–
Level Key Follow and Center Key
When Level Key Follow is set to 100%
Large
Small
Lower range
Center Key = C3
Higher range
Amount of AEG
level change
