Yamaha S70 XS Reference Manual Download

Page: 93 / 160

Reference Manual

Reference

Parameter

Multi Mode

The Multi mode lets you set up the S90 XS/S70 XS as a multi-timbral tone generator for use with computer-based music

software or external sequencers. If each track in a song file uses a different MIDI channel, you can independently

assign each of the Parts in a Multi to those MIDI channels. In this way, you can play back the song data on a sequencer

with each track playing a different Voice. You can create a Multi containing up to 16 Parts using the internal tone

generator (

page 6

). Since there is only one bank for the Multis, you need not select a Multi Bank.

NOTE:

About the User Bank of Multis

When shipped from the factory, this tone generator contains a full set of specially programmed 128 User Multis in the User Bank.

If a Multi in a User Bank is overwritten, the User Multi will be lost. When you store the edited Multi, be careful not to overwrite any

important User Multis.

Multi Play

In the Multi Play mode, you can select and play any of the Multis.

Selecting a Program

The S90 XS/S70 XS features 128 specially programmed Multis, stored to internal User Memory. The Bank consists of

eight Groups (A to H), each of which contains 16 Multi programs. Selecting Multis is done in basically the same way as

selecting Voices. To call up the desired Multi program, select the appropriate Group and Number via the [A] – [H]

buttons and the Number [1] – [16] buttons.

Multi Play display

Multi Number

Part Number

Multi Name

Arpeggio Tempo

Bank/Number/Name of the current Voice

Ins, Cho, Rev, Master Effect, Master EQ on/off status

NOTE:

To change the view to the Simple display, keep holding down the [SHIFT] button and press the Cursor [

]/[

] button.

NOTE:

You can select the Voice corresponding to the current Part by pressing the [CATEGORY SEARCH] button.

The Edit (

) indicator

When changing the value of the parameter in the Multi Play or Edit mode, the Edit (

) Indicator will appear on the top

right corner of the LCD display. This gives a quick confirmation that the current Multi has been modified but not yet

stored. To store the current edited status, follow the instructions below.

Operation

Press the [MULTI/SEQ PLAY] button.

Multi Play display (default)

Simple display

Summary of Contents for S70 XS

































































































































































Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands

Yamaha S70 XS, Reference Manual

Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands