Yamaha S70 XS Reference Manual Download

Page: 101 / 160

Reference Manual

Reference

101

Parameter

Part Edit

Part Edit lets you edit the parameters of the individual Parts that make up a Multi.

Receive Ch (Receive Channel)

Determines the MIDI receive channel for the selected Part. The MIDI transmit channel for the real-time changing of the

controlled data is the same as this parameter setting.

Settings:

01 – 16, off

Bank
Number

Determines the Voice assigned to the current Part by specifying the Voice Bank and Number.

NOTE:

You can select a program by using the BANK [INC]/[DEC] buttons, [A] – [H] buttons, and Number [1] – [16] buttons in the

“Bank” or “Number” section when the cursor is located at “Bank” or “Number” and the [PART]/[MUTE]/[SOLO] lamps are turned

off. You can select the Voice corresponding to the current Part by pressing the [CATEGORY SEARCH] button.

Param. with Voice (Parameter with Voice)

Determines whether or not the following parameter settings of the selected Voice are copied from the Voice to the

current Part when you change a Voice for the current Part individually.

Arpeggio settings, Filter Cutoff Frequency, Filter Resonance, Amplitude EG, Filter EG, Pitch Bend Range (Upper/Lower),

Note Shift, Assignable 1/2

NOTE:

Regardless of the Parameter with Voice setting, the following settings are always copied when a Normal Voice is selected:

Mono/Poly, Porta Sw (Portamento Part Switch), Porta Time (Portamento Time) and Porta Mode (Portamento Mode).

Settings:

off (not copied), on (copied)

Arp Play Only (Arpeggio Play Only)

Determines whether or not the current Part plays only the note events of the Arpeggio playback. When this parameter is

set to on, only the note events of the Arpeggio playback affect the tone generator block.

Settings:

off, on

Operation

[MULTI/SEQ PLAY]



Select Multi programs



[EDIT]



Select the desired Part

“1” – “16” in the Multi Edit Select display



[ENTER]



Select the desired

display in the Multi Part Edit Select display



[ENTER]



Edit display

1 Voice

4
7

3
6

Summary of Contents for S70 XS

































































































































































Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands

Yamaha S70 XS, Reference Manual

Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands