Reference Manual
Reference
79
From this display, you can set the Insertion Effect applied to the A/D Input
Part signal in the Performance mode. You can call up the detailed setting
display of Insertion Effect A/B from this display.
Ins Connect Type (Insertion Connection Type)
Determines the connection between Insertion Effects A and B. The setting changes are shown on the diagram in the
display, giving you a clear picture of how the signal is routed. The Effect Type is shown at the top of the display.
Settings:
ins A -> B, ins B -> A
Chorus Send
Adjusts the Chorus send level for the A/D Input Part. The higher the value, the more pronounced the Chorus. This
parameter can be changed via the Knob directly.
Settings:
0 – 127
Reverb Send
Adjusts the Reverb send level for the A/D Input Part. The higher the value, the more pronounced the Reverb. This
parameter can be changed via the Knob directly.
Settings:
0 – 127
Dry Level
Determines the level of each Part which has not been processed with the System Effects (Reverb, Chorus).
Settings:
0 – 127
Output Select
Sets the monitor output destination.
Settings:
See below.
NOTE:
The Reverb Send and Chorus Send values are set to “0”, and Dry Level is set to “127” when Output Select is not set to “L&R.”
Ins A (Insertion Effect A)
Ins B (Insertion Effect B)
When the cursor is located here, pressing the [ENTER] button calls up the Effect Parameter display.
9 A/D FX (A/D Effect)
ins A -> B
Signals processed with Insertion Effect A will be sent to Insertion Effect B and signals processed with Insertion Effect B are sent to
Reverb and Chorus.
ins B -> A
Signals processed with Insertion Effect B will be sent to Insertion Effect A and signals processed with Insertion Effect A are sent to
Reverb and Chorus.
Display indication
Output destination
Stereo/Mono
L&R
OUTPUT L and R
Stereo
asL&R
ASSIGNABLE OUTPUT L and R
Stereo
asL
ASSIGNABLE OUTPUT L
Mono
asR
ASSIGNABLE OUTPUT R
Mono
vocoder
Insertion Effect for Part 1
—
