Yamaha S70 XS Reference Manual Download

Page: 77 / 160

Reference Manual

Reference

Supplementary Info.

Basic Structure

Appendix

This varies the signal level at the “Freq” (Frequency) setting to create various

frequency curve characteristics. The higher the setting, the smaller the bandwidth.

The lower the setting, the greater the bandwidth.

Settings:

0.1 – 12.0

NOTE:

When the Shape parameters of the Low and High are set to “shelv,” the

“Q” parameters of Low and High are not available.

Chorus Return

Determines the Return level of the Chorus Effect. This parameter can be

changed via the Knob directly.

Settings:

0 – 127

Chorus Pan

Determines the pan position of the Chorus effect sound.

Settings:

L63 (far left) – C (center) – R63 (far right)

Chorus To Reverb

Determines the Send level of the signal sent from the Chorus Effect to the Reverb Effect. The higher the value, the

deeper the Reverb that is applied to the Chorus-processed signal.

Settings:

0 – 127

Reverb Return

Determines the Return level of the Reverb Effect. This parameter can be changed via the Knob directly.

Settings:

0 – 127

Reverb Pan

Determines the pan position of the Reverb effect sound.

Settings:

L63 (far left) – C (center) – R63 (far right)

Chorus

Reverb

Master

When the cursor is located here, pressing the [ENTER] button calls up the Effect Parameter display.

Switch

Determines whether or not the Master Effect can be used. This parameter cannot be selected from this display. When

the Arpeggio/Effect Function is set to “EFFECT ON/OFF,” you can turn each effect on/off via the Function buttons.

Category
Type

From the Category column, you can select one of the Effect Categories, each of which contains similar Effect types.

From the Type column, you can select one of the Effect Types listed in the selected Category.

Settings:

Details about the Effect categories and the Effect types are described on

page 16

NOTE:

The “Category” is not edited in the Reverb and the Master effect parameter display because there is only one Reverb/Master

category.

Preset

This lets you call up pre-programmed settings for each Effect type, designed to be used for specific applications and

situations.

You can change how the sound is affected by the selected pre-programmed settings.

NOTE:

For a list of the Effect presets, see the Data List (separate PDF documentation).

7 Effect

Effect Parameters

–

0.1

12.0

Frequency

Summary of Contents for S70 XS

































































































































































Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands

Yamaha S70 XS, Reference Manual

Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands