Yamaha S70 XS Reference Manual Download Page 25

Page: 25 / 160

Reference Manual

Basic Structure

Basic Structure

Functional Blocks

Audio Record/Play

Edit Buffer and User Memory

The edit buffer is the memory location for edited data of these types: Voice, Performance, Master, and

Multi. Data edited in this location will be stored to the User Memory.

If you select another Voice, Performance, Master, or Multi, the entire contents of the edit buffer will be

rewritten with the newly selected Voice/Performance/Master/Multi data. Make sure to store any

important data before selecting another Voice, etc.

Edit Buffer and Recall Buffer

If you’ve selected another Voice/Performance/Multi without storing the one you were editing, you can

recall your original edits, since the edit buffer’s contents are stored in backup memory.

NOTE

Keep in mind that the recall buffer is not available in the Master Edit mode.

Internal Flash Memory

In addition to the above memory types, this instrument also features the internal flash memory which

can be used like an external USB storage device. The internal flash memory can be used as destination

of the files handled in the File mode and audio data created in the Audio Record/Play mode (

page 131

This memory also can be used as destination of data backup because the data saved here is

maintained even when turning the power off.

NOTE

The capacity of the internal flash memory is 192MB.

CAUTION

Executing the Factory Set will format the internal flash memory. Make sure to save any important data to a USB

storage device before executing the Factory Set.

Summary of Contents for S70 XS

































































































































































Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands

Yamaha S70 XS, Reference Manual

Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands