Yamaha S70 XS Reference Manual Download

Page: 31 / 160

Reference Manual

Reference

Normal Voice Edit

Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ

Supplementary Info.

Basic Structure

Appendix

Keyboard MIDI transmit channel setting

You can set the MIDI transmit channel over which the keyboard/controller performance sends MIDI data (to an external

sequencer, tone generator, or other device).

Press the [PART] button.

The [PART] button lights.

Press one of the Number [1] – [16]
buttons to determine the MIDI
transmit channel.

After setting, press the [PART] button to return to the original status.

The lamp of [PART] button goes off.

NOTE:

This parameter is same as the Keyboard Transmit Channel (

page 137

) in the MIDI display of the Utility mode. Making a setting

here automatically changes the setting of that parameter as well.

Keyboard Octave/Transpose Setting

To shift the pitch range in playing the keyboard, use the OCTAVE [-]/[+] buttons

and TRANSPOSE [-]/[+] buttons.

The OCTAVE [-]/[+] button lets you shift the pitch of the keyboard in octave and by up to three octaves. For example,

you may want to shift the pitch down lower to get extra bass notes, or shift up to get higher notes for leads and solos.

The OCTAVE [-]/[+] controls let you do this quickly and easily. The range is from -3 to +3, with 0 being standard pitch.

Pressing the [-] and the [+] buttons together at the same time will return the setting to the initial value (0). The current

octave range can be confirmed via the status of the LED lamp of the OCTAVE [-]/[+] buttons. When set to one octave

down or up, the corresponding lamp lights. When set to two octaves down or up, the corresponding lamp flashes slowly.

When set to three octaves down or up, the corresponding lamp flashes quickly.

The TRANSPOSE [-]/[+] button lets you shift the pitch of the keyboard in semitones (up to 11 semitones). This function

allows you to play the same position even if the song data or another instrument player transposes the pitch. The

Transpose Up/Down controls let you do this quickly and easily. Pressing the [-] and the [+] buttons together at the same

time will return the setting to the initial value (0). When set to one semitone down or up, the corresponding lamp lights.

NOTE:

This parameter is same as the Keyboard Octave and Keyboard Transpose (

page 133

) in the MIDI display of the Utility mode.

Making a setting here automatically changes the setting of that parameter as well.

Summary of Contents for S70 XS

































































































































































Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands

Yamaha S70 XS, Reference Manual

Search results

Summary of Contents for S70 XS

Reviews:

Related manuals for S70 XS

Brands by name

Popular brands