Yamaha R1 Series 2015, Service Manual

Page: 50 / 704

FEATURES
1-41
“Logging” (for CCU-equipped models)
Vehicle and riding information can be recorded
(logged) and this data can be accessed with a
smart device. (Refer to “CONNECTING TO THE
CCU (for YZF-R1M)” on page 4-5.)
[To start and stop logging]
1. From the MENU screen, select “Logging”.
TIP
If a CCU is not installed or the CCU is not prop-
erly connected, then the “Logging” module can-
not be selected.
2. Select START to start logging.
3. To stop the “Logging” function, select STOP
or turn the vehicle off.
“Maintenance”
This function allows you to record distance trav-
eled between engine oil changes (use the OIL
item), and for two other items of your choice (use
INTERVAL 1 and INTERVAL 2).
[To reset a maintenance item]
1. From the MENU screen, select “Mainte-
nance”.
2. Select the item you want to reset.
3. Long push the wheel switch to reset the item.
TIP
Maintenance item names cannot be changed.
“Unit”
This module allows you to set the fuel consump-
tion units, and for certain markets, the display
can be switched between kilometers and miles.
When using kilometers, the fuel consumption
units can be changed between km/L or
L/100km. When using miles, MPG will be avail-
able.
[To set the distance or fuel consumption
units]
1. From the MENU screen, select “Unit”.
1. Logging indicator
GPS
GPS
1
GPS
INTERVAL 2
OIL
INTERVAL 1 000000 km
123456 km
123456 km
Maintenance
km/h
GPS 12:00