Yamaha R1 Series 2015, Service Manual

Page: 327 / 704

REAR SHOCK ABSORBER ASSEMBLY
4-110
Damage/pitting
o
Replace.
3. Check:
• Collars
Damage/scratches
o
Replace.
EAS31654
ASSEMBLING THE REAR SHOCK
ABSORBER ASSEMBLY
1. Install:
•
Bearing “1”
• Oil seal
TIP
Install the bearing with a socket “2” that matches
its outside diameter.
2. Install:
•
Bushing “1”
• Circlip (for YZF-R1)
•
Circlip (for YZF-R1M)
• Dust seal
TIP
Install the bushing with a socket “2” that matches
its outside diameter.
EAS30222
INSTALLING THE RELAY ARM
1. Lubricate:
•
Collars
• Oil seals
2. Install:
• Bearings “1”
(to the relay arm)
• Oil seals “2”
(to the relay arm)
TIP
• When installing the oil seals “2” to the relay
arm, face the character stamp of the oil seals
outside.
•
Press in the oil seal so it does not protrude
from the end surface of the relay arm.
Installed depth “a”
4.0 mm (0.16 in)
Installed depth “a”
YZF-R1 6.0 mm (0.24 in)
YZF-R1M 3.0 mm (0.12 in)
New
2
1
a
New
New
2
1
a
Recommended lubricant
Lithium-soap-based grease
Installed depth “a”
4.5 mm (0.18 in)
Installed depth “b”
3.5 mm (0.14 in)
3. Relay arm
4. Connecting arm
5. Rear shock absorber assembly
6. Frame
A. Left side
B. Right side
New
1 1
3
4
2
6
2
4
5
a
b b