Yamaha 2001 YZ426F/LC, Owner'S Service Manual

Page: 132 / 626

2 - 22
SPEC
CABLE ROUTING DIAGRAM
Ô
Fasten the TPS lead (in the
sub wire harness) under the
frame so that it does not con-
tact the carburetor.

Fasten the TPS lead under the
coupler to the frame with a
plastic locking tie.
Ò
Pass the carburetor breather
hose and overflow hose
between the connecting rod
and cross tube (frame).
˜
Fasten the neutral switch lead
and oil hose together with a
plastic locking tie and cut off
the tie end.
ˆ
Fasten the cylinder head
breather hose and neutral
switch lead to the frame with a
plastic locking tie.
Ø
Fasten the neutral switch lead
to the frame with a plastic
band.
∏
Fasten the cylinder head
breather hose with the hose
holder.
Œ
Pass the clutch cable through
the cable guide.
Â
Fasten the neutral switch lead
and CDI magneto lead together
with a plastic band.
Í
Pass the clutch cable on the
inside the cylinder head
breather hose.
Ê
Pass the cylinder head
breather hose along the inner
side of the radiator pipe.
Ë
Pass the radiator breather
hose from the right side of the
frame to the left side, over radi-
ator pipe 1, along the inner side
of radiator hose 4 and the radi-
ator, and between the lower
engine bracket, crankcase, oil
hose and the frame.
◊
Pass the clutch cable between
the frame and radiator and
over the lower boss on the radi-
ator.