82
WIRES-X Software
Main Menu
Announcement
Cautions
• The announcement output function is activated only for a analog operation. This function is not available for a digital operation.
• The same announcement will not be transmitted again for about 20 seconds.
Connect request message ..........Set whether or not to inform when receiving a connection request from another node while
connecting to a node/room on the Internet.
Setting it to ON by inserting a check-mark, the announcement “Connect request from *****” will
be transmitted (***** refers to a node ID).
Room IN/OUT .............................Set whether or not to inform when other nodes come to or go out from the room you are
currently connecting to.
Setting it to ON by inserting a check-mark, an announcement such as “***** IN” or “***** OUT”
will be transmitted (***** refers to a node ID).
Room logon node info ................Set whether or not to include the number of nodes connected (the number of activities) in the
announcement when connecting to a room.
ON (with a check-mark) .......... Includes the number of activities in the announcement.
Example: “This is JQ1YBG WIRES X. Connected to *****. Three
Nodes.”
OFF (without a check-mark) ... Informs only the ID of the room you are connecting to.
Example: “This is JQ1YBG WIRES X. Connected to *****.”
Caution
This setting also affects the DTMF #66666 command response and the content when VOICE is
selected from ID.
DTMF #66666 .............................Set the announce operation when receiving the #66666 command.
Setting this to ON (with a check-mark) transmits an ID announcement to the DTMF #66666
command.
DTMF #55555 .............................Set the announce operation when receiving the #66666 command.
Setting this to ON (with a check-mark) transmits a response announcement to the DTMF
#55555 command.
Tip
Even when this setting is OFF (without a check-mark), if “DTMF #55555” is set to ON on the “Call settings”
screen of the WIRES-X software, the command operation will be executed.
DTMF * Disconnect ....................Set the response operation when receiving the * DTMF command.
ON (with a check-mark) .......... Accepts the * command as the #99999 command and sever the
connection to another station.
OFF (without a check-mark) ... Ignores the * command.
Caution
The DTMF command is valid only for an analog operation. The DTMF command does not function for
a digital operation.
Remote control ...........................Set whether or not to remotely control the WIRES-X software.
ON (with a check-mark) .......... Allows access from the WIRES-X remote monitor software
“WIRESMON-X.exe” (enables remote-control operations).
OFF (without a check-mark) ... Prohibits access from the WIRES-X remote monitor software
“WIRESMON-X.exe” (disables remote-control operations).
Tip
To use the web monitoring function of the remote monitor software “WIRESMON-X.exe”, setup the
dedicated plug-in separately.
Password ....................................Set the access authentication password from the WIRES-X remote monitor software
“WIRESMON-X.exe”.
Tip
Set “Remote control” to ON to enter text in this field.
