Yaesu WIRES-X HRI-200 Instruction Manual Download Page 14

Page: 14 / 107

Preparation

Installing WIRES-X Software

Confirm the destination where the WIRES-X software will install

and click

[Next]

The “Ready to install WIRES-X” window will appear.

Tip

If you put a check-mark in the “Enable WIRES-X Auto Start.” check

box, the WIRES-X software will run automatically when Windows
starts.

Even when the WIRES-X software is terminated for some reason, it
will reboot automatically.

Click

[Install]

Program installation will start.

Tips

• To confirm or change the installation setting, click

[Back]

• To exit the wizard, click

[Cancel]

When installation completes, the “Completed the WIRES-X

Setup Wizard” window will appear.

Click

[Finish]

The “Completed the WIRES-X Setup Wizard” window will close.
When WIRES-X software installation has been completed

properly, the

[Wires-X]

icon will appear on the Windows

desktop.

Click

[Close]

in the “WIRES-X installer” window

Summary of Contents for WIRES-X HRI-200











































































































Search results

Summary of Contents for WIRES-X HRI-200

Reviews:

Brands by name

Popular brands

Yaesu WIRES-X HRI-200, Instruction Manual

Search results

Summary of Contents for WIRES-X HRI-200

Reviews:

Brands by name

Popular brands