RS-1600/1602-FC-SBD User Guide
22
2.3.3 Chassis Installation
2.3.3.1
Parts Check List
• Chassis (complete with Backplane and Ops Panel installed but excluding all plug-in modules).
• Rack mount front flange mounting screws (4 off).
2.3.3.2
Procedure
1
Check for damage.
2
Slide the chassis assembly onto the rack rails until the front flanges engage on the rack. Ensure the
chassis is centrally located.
3
If in doubt about correct orientation, the drive bays (at front) should have their black drive connectors
toward the bottom of each bay.
4
Screw the 4 front rack mount screws through the flanges and tighten.
5
Fit and tighten the rear hold down screws ensuring the enclosure is in tight contact to both the side and
top of the chassis to avoid any movement of the chassis in the rack.
Figure 2–2
Rack Mounting Rail Kit
Summary of Contents for RS-1600-FC-SBD
