HDMI 1.4/2.0 TX Subsystem
68
PG235 October 4, 2017
Chapter
5:
Example Design
The
Generate Output Products
dialog box appears.
7. Click on
Generate
.
a. You may optionally click
Skip
if you just want to generate the example design.
8. Right click on the HDMI 1.4/2.0 Transmitter Subsystem component under Design source,
and click
Open IP Example Design
.
9. Choose the target project location, then click
OK
.
The IPI Design is then generated. You may choose to Run Synthesis, Implementation, or
Generate Bitstream.
An overall system IPI block diagram of the KC705 based example design is shown below.
X-Ref Target - Figure 5-9
