HDMI 1.4/2.0 TX Subsystem
54
PG235 October 4, 2017
Chapter
4:
Design Flow Steps
Video Phy Controller Setting Section
: Allows the configuration of the Transmitter PLL
type and Receiver PLL Type to the Video PHY Controller prior generating the example
design. It also allows user to selectively opt-out the NI-DRU to optimize resource utilization
if the video resolution they plan to support doesn't require NI-DRU. Refer to
Video PHY
Controller Product Guide
for details about NI-DRU requirements.
Example Design Overview Section
: A system block digram to show the overview of the
example design to be generated.
Native Video Interface Option
The native video interface option window is shown in
.
Include HDCP 1.4 Encryption
: This option enables HDCP 1.4 encryption.
Include HDCP 2.2 Encryption
: This option enables HDCP 2.2 encryption.
Note:
HDCP 1.4 and 2.2 Encryption options are only configurable if you have a HDCP license, else it
is disabled and cannot be selected from the GUI.
IMPORTANT:
The Open Example Design is not supported for Native Video Interface. Therefore, the
Example Design Tab is not available when Native Video is selected.
X-Ref Target - Figure 4-4
Figure
4
‐
4:
Native Video Interface Option
