Xilinx HDMI 1.4 Product Manual Download Page 16

Page: 16 / 108

HDMI 1.4/2.0 TX Subsystem

PG235 October 4, 2017

www.xilinx.com

Chapter

Product Specification

Audio Infoframe

Only number of channels are set for Audio Infoframe and it is hard-coded to 2 in the HDMI

TX Subsystem driver. Other fields are not updated and remain as zero always.

HDCP

As part of the HDMI TX Subsystem, the Xilinx® LogiCORE™ IP High-bandwidth Digital

Content Protection (HDCP™) transmitters are designed for transmission of audiovisual

content securely between two devices that are HDCP capable. In this HDMI TX Subsystem,

both HDCP 1.4 and HDCP 2.2 Transmitter IP cores are included. However because HDCP 2.2

supersedes the HDCP 1.4 protocol and does not provide backwards compatibility, you need

to decide and choose targeted content protection schemes from the Vivado IDE. Four

different options are available to choose from:

• No HDCP
• HDCP 1.4 only
• HDCP 2.2 only
• HDCP 1.4 and HDCP 2.2

X-Ref Target - Figure 2-9

Send Feedback

Summary of Contents for HDMI 1.4













































































































Search results

Summary of Contents for HDMI 1.4

Reviews:

Related manuals for HDMI 1.4

Brands by name

Popular brands

Xilinx HDMI 1.4, Product Manual

Search results

Summary of Contents for HDMI 1.4

Reviews:

Related manuals for HDMI 1.4

Brands by name

Popular brands