Xerox Versant 180 Press, User Manual

Page: 74 / 166

Use the following USB memory devices:
• A formatted USB memory device
• A USB 2.0 compliant memory device (USB 1.1 is not supported.)
• A USB memory device with a storage capacity of up to 128 GB
Before using the Store to USB feature, review the following information:
• A USB memory device encrypted with software is not supported.
• A commercially available Memory Card Reader with a single slot can be used for this
feature, but the safe performance of this reader is not guaranteed. When a Memory
Card Reader with multiple slots is used, only one particular slot is available.
• When a USB memory device is inserted into the USB memory slot during the Energy
Saver mode, the UI touch screen does not light. After exiting the Energy Saver mode
by pressing the Energy Saver button, insert the USB memory device again or select
Store to USB on the Home window.
• Before removing the USB memory device, make sure that a window indicating that
data is being transferred is not displayed. If you remove the USB memory device
while the data is being stored, the data in the device may be damaged. You can also
view Job Status to confirm if the data has been stored to the USB memory device.
Using the Store to USB Feature
1. Load your original documents either in the document feeder or on the document
glass.
2. Insert the USB memory device into the USB memory slot on the front of the press
(near the User Interface).
One of the following happens:
• The USB Device Detected window displays.
• The Store to USB window displays.
• The UI touch screen does not change.
3. Choose one of the following options:
• If the USB Device Detected window displays, perform the following:
1. On the press UI, select Store to USB.
2. Go to Step 4 .
• If the Store to USB window displays, go to Step 4 .
4. From the main Store to USB window, select Save in.
5. Select a folder in which to save the scanned data.
This will be a folder location on the USB memory device.
6. Select Save.
The main Store to USB window displays.
7. Select the desired scan options.
8. If desired, select Preview.
9. Press Start to begin the scanning process.
10. Retrieve the original documents from either the Document Feeder or the Document
Glass.
Xerox ® Versant ® 180 Press 3-48
User Guide
Press Apps