Xerox Versant 180 Press User Manual Download | Manualshive

Page: 48 / 166

background image

Page Layout

The Page Layout options are ideal for handouts, storyboards, or for archival purposes.

Pages per Side

The Pages per Side feature is ideal for handouts, storyboards or for archival purposes.
It allows the scanning of up to eight independent images to fit onto one sheet of paper.
Your press reduces or enlarges the images as needed in order to display them either
in portrait (upright) or landscape (sideways) orientation on one page; this is based on
the paper supply selected.

Repeat Image

This option allows you to copy a single image up to eight times onto one page.

Variable Repeat: This option specifies the number of times to repeatedly copy the
image along each of the long and short sides of the paper. You can specify from 1 to
23 repeats along the short side (Y) and from 1 to 33 repeats along the long side (X).
The examples shown are a typical output that can be produced when using the Repeat
Image feature.

Poster

This feature allows you to create a large poster by pasting together copies spread over
multiple sheets. Copies are provided with a paste margin so that they can be pasted
together. Options include:

Output Size

This option allows you to choose from a list of preset output poster sizes.

Enlargement %

This option allows you to enter specific height and width percentage values (from
100% to 400%) for your final poster size.

Annotations

This option allows you to add a stamp to your copied output. Options include:

Comment

This option allows you to add comment stamps that are stored on the machine to the
output copies. Select one of eight existing stamped messages to be printed on the first
page or all pages of your copied sets. Stored comments include Confidential, Urgent,
and Draft. You can also create new or edit existing comments. These can also be stored
to the machine memory. You can also change the position and appearance of the
comment using the Position and Font Size buttons.

Date

This option allows you to place the current date in the margins of your output. The
date can be printed on only the first page of the output, or it can be printed on all
pages. You can also change the position and appearance of the date using the Position
buttons.

Xerox

®

Versant

®

180 Press

3-22

User Guide

Press Apps

«
...
46
47
48
49
50
...
»

Summary of Contents for Versant 180 Press







































































































































































Reviews:

No comments

Related manuals for Versant 180 Press

ImageCLASS MF3240 Series

Brand: Canon Pages: 62

ImageCLASS MF4270

Brand: Canon Pages: 226

imageCLASS D660

Brand: Canon Pages: 8

ImageCLASS MF3240 Series

Brand: Canon Pages: 136

Color imageRUNNER C5180 Series

Brand: Canon Pages: 851

imageCLASS D320

Brand: Canon Pages: 121

imageCLASS MF212w

Brand: Canon Pages: 236

imageCLASS D760

Brand: Canon Pages: 82

imageclass LBP251dw

Brand: Canon Pages: 72

ImageCLASS MF4270

Brand: Canon Pages: 248

ImageCLASS MF4270

Brand: Canon Pages: 36

imageCLASS D760

Brand: Canon Pages: 8

imageCLASS MF4100 Series

Brand: Canon Pages: 140

imageclass LBP251dw

Brand: Canon Pages: 116

imageCLASS D860

Brand: Canon Pages: 73

imageCLASS D1320

Brand: Canon Pages: 36

ImageCLASS MF3240 Series

Brand: Canon Pages: 15

imageCLASS D550

Brand: Canon Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands