Xerox Versant 180 Press User Manual Download | Manualshive

Page: 106 / 166

background image

4. Insert the tab stock into the tray so the straight edge of the stock is in the feed

direction (lead edge) and the tabs are to the left (trail edge).

5. Continue to insert the tab stock into the tray until it stops.
6. Adjust the paper guides so that they touch the edges of the stack.
7. If the Paper Tray settings/Tray Properties window displays on the UI, confirm the

correct tray to which it is printing and other information, including size, type (precut
tab), and, if necessary, paper curl and/or alignment option.

8. Select Confirm or OK to save the information and close the Paper Tray settings/Tray

Properties window.

Loading Transparencies in the Bypass (Tray 5)

Note

Do not use transparencies with a white side strip (either permanent or removable).

1. Gently extend the Bypass tray (Tray 5) as necessary to accommodate the paper.
2. Hold the center of the paper guides and slide them to the desired paper size.
3. Select the appropriate paper stock for your print/copy job.
4. Fan the transparencies to stop them from sticking together before loading into the

tray.

5. Insert the transparencies LEF into the tray with the side to be printed on face up and

with the removable stripe to the right.

6. Continue to insert the paper or media into the tray until it stops.
7. Adjust the paper guides so that they touch the edges of the stack.
8. From the Paper Tray settings/Tray Properties window, enter the correct paper

information, including size, type, weight and, if necessary, paper curl and/or alignment
option.

9. Select Confirm or OK to save the information and close the Paper Tray settings/Tray

Properties window.

Loading Pre-drilled Stock in the Bypass (Tray 5)

1. Gently extend the Bypass tray (Tray 5) as necessary to accommodate the paper.
2. Hold the center of the paper guides and slide them to the desired paper size.
3. Select the appropriate paper stock for your print/copy job.
4. Fan the sheets before loading them into the tray.
5. Insert the pre-drilled stock into the tray in the LEF direction with the holes to the

right.

6. Continue to insert the paper or media into the tray until it stops.
7. Adjust the paper guides so that they touch the edges of the stack.
8. From the Paper Tray settings/Tray Properties window, enter the correct paper

information, including size, type, weight and, if necessary, paper curl and/or alignment
option.

9. Select Confirm or OK to save the information and close the Paper Tray settings/Tray

Properties window.

Xerox

®

Versant

®

180 Press

4-10

User Guide

Paper and Media

«
...
104
105
106
107
108
...
»

Summary of Contents for Versant 180 Press







































































































































































Reviews:

No comments

Related manuals for Versant 180 Press

Brand: DataCard Pages: 8

SCX-4300 - SCX 4300 B/W Laser

Brand: Samsung Pages: 4

ML-2240 - 23 Ppm Mono Laser Printer

Brand: Samsung Pages: 16

ML 2510 - B/W Laser Printer

Brand: Samsung Pages: 170

Brand: Samsung Pages: 165

Brand: Xerox Pages: 114

Brand: JCM Pages: 22

NANOCOLOR UV/VIS II

Brand: Macherey-Nagel Pages: 6

Brand: Keeler Pages: 25

imageRUNNER ADVANCE C3330 Series

Brand: Canon Pages: 5

imagePROGRAF TA-30

Brand: Canon Pages: 49

Brand: Canon Pages: 210

Color imageCLASS MF8180c

Brand: Canon Pages: 34

Brand: Microcom Pages: 207

Brand: Ricoh Pages: 678

imageCLASS LBP247dw

Brand: Canon Pages: 32

Brand: Dell Pages: 4

Brand: Dell Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands